|
PM001 USB 1.0 REPEATER CABLE |
More |
The Repeater cable actively buffers the incoming and outgoing signals to ensure compliance with USB's revision 1.1 specification for electrical and timing minimums. You can connect up to 5 active extension cables end-to-end to achieve up to 25 meters extension. Both low and high speed USB devices will function equally well with the USB Active Extension.
|
|
PM002 USB 2.0 LINK CABLE |
More |
USB 2.0 Link provides a USB-based host-host-network feature for two or more USB hosts of PC/Notebook. It conforms to USB 12Mbps & 480Mbps specification. Version1.1 and 2.0, and supports TCP/IP, NetBEUI, IPX/SPX protocols. It has “Super-link” and “Virtual-Network” function, so, it is not the only solution for host-to-host communication but also shares Internet resources between two or more PC/Notebooks. It is suitable for mobile and SOHO environments.
|
|
PM012 USB SPEED INDICATOR |
|
The Ultimate Connectivity USB Indicator cable delivers full visibility of your PC's data performance. These features provide maximum conductivity and error-free data transmission with unsurpassed durability and flexibility for installation in tight areas. This cable connects your Hi-Speed USB 2.0 device to your PC or Mac computer for data transfer speeds of up to 480Mbps - 40 times faster than USB 1.1. It also works with any previous-version USB device.
|
 |
PM013 USB 2.0 HUB |
|
This USB 2.0 4 port Hub lets you add more USB 2.0 peripherals to your desktop computer. The hub has 4 downstream ports that will connect either the new USB 2.0 high performance peripherals or USB 1.1 devices. This means it is 'fully compatible' with all your existing USB products.
|
|
PM023 USB 2.0 DATA LINK |
|
USB 2.0 Data Link device provides a USB-based communication to share file resources with each other for two USB hosts of PC/Notebook without any software. It is easy to operate and tote. It is very suitable for mobile environments.
|
|
PM024 PRINTER CABLE |
|
USB to printer cable is a USB device that can transform the USB signal into IEEE 1284 signal. So, users can connect the printer with IEEE 1284 connecter to the USB of Host without any software. Also, it supports multi-function devices, such as Printer-Fax-Scanner-Copier all-in-one devices. It also supports plug and play.
|
|
PM025 USB TO PS2 |
|
USB TO PS2 adapter is a USB device that can translate the PS2 keyboard or mouse signal into USB signal. It conforms every PS2 keyboard and mouse without any software, and supports plug and play. Users can plug a keyboard and mouse into any PS/2 connector, and can connect two keyboards or mouse at the same time. It is easy to operate and portable.
|
|
PM028 USB DATA LINK & RETRACTABLE CABLE BOX |
|
USB data link & flex box device integrates USB data link and flex cable box. It provides a USB-based communication to share file resources with each other for two USB hosts of PC/Notebook. It has flex cable box function. When you want to use it, you can pull from any side or both sides at the same time. Slightly pull button and the cable will automatically retract to the box. It is easy to operate and is suitable for mobile environments.
|
|
PM031 USB TO RS232 |
|
USB TO RS232 adapter is a USB device used as a bridge between one USB port and one standard RS232 serial port. Implementing USB to RS232 adapter devices via USB provides many advantages. It enables plug & play capability as well as hot-swapping. It also contains deep data FIFO and uses an accelerated UART clock frequency to further boost data rates. Only minimum power is consumed from the host during suspend. Users just simply hook the cable into PC or hub's USB port, then they can connect to any RS232 devices. The RS 232 device is easy to use.
|
|
PM032 USB 2.0 REPEATER CABLE |
|
This USB Repeater Cable amplifies your data signal, allowing you to increase the effective operating distance from PC to your peripherals by an extra 5 meters – without signal loss. Without a USB Repeater Cable, USB connections are limited in the maximum of 5 meters between the computer and device. This innovation allows you to connect up to five USB Repeater cables to a USB device cable serially, for an effective total operating distance of up to 25 meters.
|
|
PM035 USB 2.0 BUS POWER CABLE |
|
The USB Bus Power cable added one extended USB power to gain more power for devices. The current can be up to 1A, so is very useful for high current devices such as removable hard disks.
|
|
PM041 USB TO 2-RS232 ADAPTER |
|
USB TO 2-RS232 adapter is a USB device used as a bridge between one USB port and two standard RS232 serial ports. Implementing USB TO 2-RS232 adapter device via USB provides many advantages. It enables plug & play capability as well as hot-swapping. It also contains deep data FIFO and uses an accelerated UART clock frequency to further boost data rates. Only minimum power is consumed from the host during suspend. Users just simply hook the cable into PC or hub's USB port. Then you can connect to any RS232 devices. The RS 232 device is easy to use.
|
